1.25 mm Pitch, 6-Position Shrouded Header
The 0530470660: This is a Molex PicoBlade 53047 series board-to-cable header with 6 positions on a 1.25 mm pitch — the footprint is tight enough for compact handheld devices but still leaves room for routing traces between pads on a standard 2-layer board. The shroud is a full four-wall design with a detent lock that snaps into the mating receptacle housing — you hear it click when it seats, and it holds the pair together against cable tug or light vibration. Mating contacts are gold flash over phosphor bronze — the flash layer is thin, so this header is best for moderate cycle counts (tens to low hundreds) in clean indoor environments, not for frequent field reconnects.
Insulation is glass-filled nylon rated UL94 V-0 — the header can sit inside equipment enclosures that require a flammability rating for the plastic components.
Mating Compatibility: PicoBlade 53048 Receptacle
The 6-position version is loaded full (all positions populated), so no blank cavities to worry about — every pin carries a signal or power circuit.