Compact wire-to-board receptacle with latch retention
The 5031590200: The 1.50 mm pitch keeps the PCB footprint small, while the latch holder fastening ensures the mated connector stays locked under vibration — a key requirement for automotive and industrial environments.
Termination is through-hole solder with kinked pins — the kink provides a mechanical interference fit in the plated hole, improving solder joint reliability during thermal cycling. The contact length after post is 0.134" (3.40 mm), suitable for standard PCB thicknesses. Contact finish on both mating and post sides is tin with 39.4 µin (1.00 µm) thickness, adequate for moderate mating cycle counts in non-corrosive environments.