Skip to main content
Molex 5031590200

Molex 5031590200 – CLIK-Mate 1.50 mm Pitch 2-Position

MPN 5031590200
Active

Molex CLIK-Mate 503159 series 5031590200, 2-position single-row receptacle, 1.50 mm pitch, through-hole kinked-pin termination, tin-plated forked contacts, latch holder fastening, beige PA nylon UL94 V-0 housing, -40°C to 105°C operating range.

$0.4700 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesCLIK-Mate 503159
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5031590200 key specifications
ParameterValue
SeriesCLIK-Mate 503159
TypeForked
MountingThrough Hole
Connector typeReceptacle
Fastening typeLatch Holder
Operating temperature-40°C ~ 105°C
Contact materialCopper Alloy
Insulation colorBeige
Insulation height0.313\" (7.95mm)
Insulation materialPolyamide (PA), Nylon
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire

All specifications

5031590200 additional specifications
ParameterValue
PackageTray
FeaturesBoard Guide
TerminationKinked Pin, Solder
ApplicationsAutomotive, General Purpose, Industrial, Lighting, Medical
Rows1
Pitch0.059\" (1.50mm)
Positions2
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin
Contact finish thickness - post39.4µin (1.00µm)
Contact finish thickness - mating39.4µin (1.00µm)

Product details

Compact wire-to-board receptacle with latch retention

The 5031590200: The 1.50 mm pitch keeps the PCB footprint small, while the latch holder fastening ensures the mated connector stays locked under vibration — a key requirement for automotive and industrial environments.

Termination is through-hole solder with kinked pins — the kink provides a mechanical interference fit in the plated hole, improving solder joint reliability during thermal cycling. The contact length after post is 0.134" (3.40 mm), suitable for standard PCB thicknesses. Contact finish on both mating and post sides is tin with 39.4 µin (1.00 µm) thickness, adequate for moderate mating cycle counts in non-corrosive environments.

MPN
5031590200