Skip to main content
TE Connectivity AMP Connectors 1-1776275-2

1-1776275-2 TE Buchanan PCB Terminal Block, 12 Pos, 3.5mm

MPN 1-1776275-2
Active

TE Connectivity Buchanan, PCB terminal block, 1-1776275-2, 12 positions, 0.138" (3.50mm) pitch, 1 level, 7 A, 250 V, through hole, screw termination, blue.

$3.2800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-1776275-2 key specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage250 V
Current7 A
Wire gauge18-26 AWG
Wire terminationScrew - Leaf Spring, Wire Guard
Operating temperature-55°C ~ 105°C
ColorBlue
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingSteel, Stainless
Screw material - platingSteel, Galvanized - Chromate Plated
Contact material - platingBrass - Copper Tin Plated

All specifications

1-1776275-2 additional specifications
ParameterValue
Pitch0.138\" (3.50mm)
PackageBulk
FeaturesInterlocking (Side)
Screw threadM2.6
Torque - screw0.28 Nm (2.5 Lb-In)
Number of levels1
Mating orientationHorizontal with Board
Positions per level12

Product details

The TE Connectivity Buchanan 1-1776275-2 is a 12-position, single-level PCB terminal block on a 0.138" (3.50 mm) pitch. It terminates 18-26 AWG wire with a screw clamp — the M2.6 screw drives a leaf spring against a wire guard, giving a gas-tight connection that doesn't cold-flow the conductor.

Screw Torque and Termination — the Field-Service Spec

The screw torque spec is 0.28 Nm (2.5 Lb-In). That's the value a field tech needs on the driver — over-torque strips the M2.6 thread in the PA66 housing; under-torque leaves a high-resistance joint that heats under load. The clamp is steel, stainless, and the screw is galvanized steel with chromate plating, so the corrosion resistance is adequate for dry indoor panels but not for washdown or outdoor exposure. The contact material is brass with a copper-tin plating — adequate for the 7 A rating at 250 V, but the tin surface does limit the block to low mating-cycle applications (it's a permanent-wire termination, not a pluggable connector).

Rated 7 A per position at 250 V. The 7 A is a per-position limit under the stated temperature range; the block's single-level construction means no de-rating for vertical stacking, but the current path through the brass contact and tin plating is the limiting factor, not the screw clamp. For a 12-position block carrying 7 A on every circuit, the total heat dissipation is about 12 × (I²R) — keep adjacent blocks spaced to avoid thermal stacking.

MPN
1-1776275-2