Skip to main content
TE Connectivity AMP Connectors 1-66359-5

TE 1-66359-5 Multimate III+ Pin, Tin, 14-18 AWG

MPN 1-66359-5
Active

TE Connectivity Multimate III+ series stamped pin contact, 1-66359-5, tin-plated phosphor bronze, 14-18 AWG, crimp termination, Tape & Reel packaging.

$0.6700 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-66359-5 specifications
ParameterValue
TypeStamped
SeriesMultimate III+
Wire gauge14-18 AWG
Contact materialPhosphor Bronze
PackageTape & Reel (TR) Cut Tape (CT)
Pin or socketPin
Contact finishTin
Contact terminationCrimp
Contact finish thickness50.0µin (1.27µm)

Product details

Stamped Pin for Multimate III+ Housings

The TE Connectivity 1-66359-5 is a stamped pin contact from the Multimate III+ series, designed for crimp termination onto 14-18 AWG wire. It mates with the corresponding Multimate III+ socket contacts and fits standard Multimate III+ housings — the same cavity geometry used across the series for signal and low-power circuits. The contact is formed from phosphor bronze with a tin plating, 50.0µin (1.27µm) thick. Tin is a workable finish for moderate mating cycles in dry indoor environments — it cold-welds under high normal force, so the contact resistance stays stable through several hundred mate-unmate cycles. For applications requiring frequent reconnection or exposure to corrosive atmospheres, a gold-plated sibling in the same series would be the better call.

Crimp Termination and Wire Range

Crimp termination means the wire barrel is mechanically compressed around the stripped conductor — no solder, no flux, no heat damage to the insulation. The 14-18 AWG range covers common signal and low-power circuit wiring in industrial control panels, automotive harnesses, and test equipment. Use the TE-certified hand crimp tool or a pneumatic applicator with the correct die set for this contact family; the crimp height spec is in the TE application drawing.

MPN
1-66359-5