Skip to main content
TE Connectivity AMP Connectors 103945-1

TE Connectivity 103945-1 AMPMODU MTE 2-Pos IDC Plug

MPN 103945-1
Active

TE Connectivity AMPMODU MTE IDC plug, 2 positions, 0.100" (2.54mm) pitch, male pin contacts, gold plating 15.0µin, free-hanging, latch holder, 22-26 AWG discrete wire.

$2.1575 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSNot applicable
IncotermsDAP / DDP Available
SeriesAMPMODU MTE
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

103945-1 specifications
ParameterValue
SeriesAMPMODU MTE
Wire typeDiscrete
TypeMale Pin
MountingFree Hanging (In-Line)
Connector typePlug
Fastening typeLatch Holder
Wire gauge22-26 AWG
Cable terminationIDC
ColorBlack
Pitch0.100\" (2.54mm)
PackageTube
Contact finishGold
Rows1
Positions2
Contact finish thickness15.0µin (0.38µm)

Product details

Active-production 2-position IDC plug for discrete wire

The 0.100" (2.54mm) pitch matches standard 0.100" ribbon spacing, but the wire type is listed as discrete, meaning each conductor is terminated individually into the IDC slot. A latch holder secures the mated pair, and the free-hanging (in-line) mount suits harness assembly where a board-mounted header isn't present.

What mates with this plug?

Pin-one orientation is marked by the housing keying; watch it every press.

Unlike ribbon-cable IDC connectors that pierce all conductors in one press, this plug terminates individual 22-26 AWG wires into separate IDC slots. The wire gauge range is tight — 22 AWG is the thickest the slot accepts, 26 AWG the thinnest. Use the correct TE hand tool or press fixture to ensure the insulation displacement blades cut cleanly through the jacket without nicking the conductor. Strain relief is built into the latch holder design; without it, the IDC connection can peel under cable pull.

Sourcing and lifecycle — still in active production

The black housing comes in Tube packaging. No official cross-reference or direct second-source is on record, so match the BOM line to this exact TE part number.

MPN
103945-1