Skip to main content
TE Connectivity AMP Connectors 6-1478762-7

TE Connectivity ADK 6-1478762-7 Backshell, 25-Pos, Shielded

MPN 6-1478762-7
Active

TE Connectivity ADK series, 6-1478762-7, two-piece backshell, 25 positions, 180° cable exit, shielded, nickel-plated zinc, M3 mating screws, strain relief, bulk.

$8.0000 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesADK
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

6-1478762-7 specifications
ParameterValue
SeriesADK
Cable typeRound
Accessory typeTwo Piece Backshell
Cable exit180°
ColorSilver
MaterialZinc
Primary materialMetal
PackageBulk
PlatingNickel
FeaturesMating Screws M3
HardwareAssembly Hardware, Strain Relief
ShieldingShielded
Positions25
Compatible D-Sub size25pos and HD44pos
Compatible shell sizeB

Product details

The TE Connectivity 6-1478762-7 is a two-piece backshell from the ADK series, designed to terminate and shield a round cable entering a 25-position D-sub connector at a straight 180° angle. It's the metal shell that clamps over the cable jacket, provides strain relief, and bonds the cable shield to the connector shell for EMI containment. The backshell is compatible with standard 25-position D-sub connectors as well as HD44-position housings that share the same B shell size.

Hardware and Construction

The housing is die-cast zinc with a nickel plating — the nickel gives a corrosion-resistant surface that maintains shield continuity across the mated pair. M3 mating screws are built into the assembly, so you don't need to source jack-screws separately. The kit also includes assembly hardware and a strain-relief clamp that grips the round cable jacket and takes the mechanical load off the solder or crimp connections inside the connector.

Shielding and Cable Exit

This is a shielded backshell — the metal-to-metal contact between the backshell halves and the D-sub connector shell creates a continuous EMI barrier around the termination area.

MPN
6-1478762-7