Skip to main content
TE Connectivity AMP Connectors 66098-1

TE Connectivity 66098-1 Multimate III+ Stamped Pin

MPN 66098-1
Active

TE Connectivity Multimate III+ stamped pin contact, 66098-1, 16-18 AWG, gold 30.0µin (0.76µm) plating, crimp termination, Tape & Reel.

$2.0000 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

66098-1 specifications
ParameterValue
TypeStamped
SeriesMultimate III+
Wire gauge16-18 AWG
Contact materialBrass
PackageTape & Reel (TR) Cut Tape (CT)
Pin or socketPin
Contact finishGold
Contact terminationCrimp
Contact finish thickness30.0µin (0.76µm)

Product details

Stamped Pin for Multimate III+ Power Connectors

As a stamped rather than machined contact, it is suited for high-volume harness builds where the cost per position matters and the current duty falls within the stamped-contact envelope.

Accepts 16-18 AWG stranded wire with the correct crimp die — the stamped barrel geometry is optimized for that gauge range. Crimp termination is standard for automated or semi-automated harness tooling; the contact feeds from Tape & Reel packaging, so it runs through a strip-and-crimp machine without manual handling. The Cut Tape option covers prototype or low-volume builds where a full reel is not justified.

Plating and Duty

Gold plating at 30.0µin (0.76µm) is a mid-grade finish — thick enough for moderate mating cycle counts in corrosive or low-voltage signal circuits, but not the heavy-duty 50µin+ gold used for continuous high-cycle applications. For power circuits where the contact sees bus-level current, the gold layer prevents oxidation on the mating interface that would otherwise increase contact resistance over time. The brass base metal provides adequate spring properties for a stamped contact in a power connector housing.

MPN
66098-1