Skip to main content
TE Connectivity AMP Connectors 1-111504-4

TE AMP-Latch 1-111504-4, 10-Pin IDC Plug 0.100" Pitch

MPN 1-111504-4
Active

TE Connectivity AMP-Latch series, 10-position dual-row IDC plug, 0.100" (2.54mm) pitch, 26-28 AWG ribbon cable, 30.0µin gold male pins, latch lock/eject hooks, free-hanging in-line mount, black housing.

$11.1200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesAMP-Latch
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-111504-4 specifications
ParameterValue
SeriesAMP-Latch
Wire typeRibbon Cable
TypeMale Pin
MountingFree Hanging (In-Line)
Connector typePlug
Fastening typeLatch Lock/Eject Hooks
Wire gauge26-28 AWG
Cable terminationIDC
ColorBlack
Pitch0.100\" (2.54mm)
PackageTray
FeaturesFeed Through
Row spacing0.100\" (2.54mm)
Contact finishGold
Rows2
Positions10
Contact finish thickness30.0µin (0.76µm)

Product details

10-Position IDC Plug for Ribbon Cable Harnesses

The TE Connectivity AMP-Latch 1-111504-4 is a 10-position, dual-row IDC plug designed for mass-termination to 26-28 AWG ribbon cable. The free-hanging (in-line) mount and latch lock/eject hooks let you secure the plug to a mating receptacle and release it without tools during field service. The black housing carries 10 male pin contacts with 30.0µin (0.76µm) gold plating on the mating surface — a thickness that supports repeated mating cycles without exposing the base metal, which matters for signal-level connections in equipment that sees periodic reconfiguration or maintenance.

This plug terminates 26-28 AWG ribbon cable via IDC (Insulation Displacement Connection), meaning the cable is laid across the contact slots and pressed down so the fork-shaped contacts cut through the insulation and grip the conductor. No stripping or soldering is needed — the termination is simultaneous for all 10 positions, which speeds harness build and eliminates variation in strip length or solder joint quality. The feed-through feature in the housing design allows the ribbon cable to pass straight through the connector body, which is typical for daisy-chain or pass-through cable assemblies where the signal continues to another connector downstream.

The eject function pushes the plug away from the receptacle when the latches are released, which helps when the connector pair is in a tight harness bundle.

MPN
1-111504-4