Skip to main content
TE Connectivity AMP Connectors 1776119-3

TE Buchanan 1776119-3 Terminal Block, 3 Pos, 5.08mm, 13.5 A

MPN 1776119-3
Active

TE Connectivity Buchanan 1776119-3, 3 Position, 5.08mm Pitch, 13.5 A, 300 V, Through Hole, Screw - Rising Cage Clamp, Side Entry

$1.1700 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1776119-3 specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current13.5 A
Wire gauge16-30 AWG
Wire terminationScrew - Rising Cage Clamp
ColorBlack
Housing materialPolyamide (PA), Nylon
Clamp material - platingBrass - Nickel Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated
Pitch0.200\" (5.08mm)
PackageBulk
Screw threadM3
Torque - screw0.68 Nm (6 Lb-In)
Number of levels1
Mating orientationHorizontal with Board
Positions per level3

Product details

Three-Position PCB Terminal Block with Rising Cage Clamp

The TE Connectivity Buchanan 1776119-3 is a three-position, single-level PCB terminal block designed for wire-to-board power and signal connections. It uses a screw-driven rising cage clamp termination — turning the M3 screw lifts a nickel-plated brass clamp plate that pulls the stripped wire against the conductor path, rather than driving the screw tip into the strands. This reduces strand damage and gives a consistent gas-tight connection across the full 16-30 AWG range. Wires enter parallel to the PCB (side entry), which suits enclosures where vertical clearance above the board is limited.

Termination and Torque

The rising cage clamp accepts solid or stranded wire from 16 AWG down to 30 AWG. The recommended screw torque is 0.68 Nm (6 Lb-In) — enough to seat the clamp firmly without stripping the M3 brass screw. Under-torquing leaves the wire loose under vibration; over-torquing can deform the clamp or strip the threads. The clamp and screw are both brass with nickel plating, giving corrosion resistance in industrial cabinet environments.

Current and Voltage Rating

Rated 13.5 A per position at 300 V, this block handles moderate power loads — control transformers, motor starters, power supplies, and distribution panels inside industrial control cabinets. The 13.5 A rating assumes all three positions are loaded simultaneously at the rated temperature; derate above that per the manufacturer's curve.

MPN
1776119-3