Skip to main content
TE Connectivity AMP Connectors 2-2106003-3

TE 2-2106003-3 IDC Connector, 3 Pos, 4mm Pitch, SMT RA

MPN 2-2106003-3
Active

TE Connectivity, IDC connector, 2-2106003-3, 3 positions, 0.157" (4.00mm) pitch, 1 row, 22 AWG, SMT right-angle, tin contacts, closed end.

$0.8299 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2-2106003-3 specifications
ParameterValue
MountingSurface Mount, Right Angle
Connector typeIndividual Wires
Wire gauge22 AWG
Cable pitch0.157\" (4.00mm)
Cable terminationIDC
ColorNatural
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesClosed End
Contact finishTin
Rows1
Board-Side pitch0.157\" (4.00mm)
Positions3

Product details

3-Position IDC for Discrete 22 AWG Wire — 4.00 mm Pitch, SMT Right-Angle

The 0.157" (4.00mm) cable pitch matches the board-side pitch, so the wire spacing is consistent from the cable through the termination to the PCB footprint. The closed-end feature means the IDC slot has a back wall — the wire stops when it bottoms out, so the installer gets a positive tactile confirmation that the conductor is fully inserted before the press. No guessing whether the wire is seated to the full depth. It mates reliably with tin-plated header pins in low-cycle applications where the connector is terminated once and stays mated. For repeated disconnect/reconnect duty, the tin-to-tin interface can fret over time; this connector is designed for a one-time termination in a fixed harness assembly.

Board Layout Fit — SMT Right-Angle Footprint

The 0.157" (4.00mm) pitch gives enough room between adjacent solder pads for a standard 22 AWG wire exit without crowding. No through-hole solder tails to worry about; the SMT pads reflow in the same pass as other surface-mount components.

MPN
2-2106003-3