Skip to main content
TE Connectivity AMP Connectors 2-332095-2

2-332095-2 TE Connectivity PCB Pin Socket, Gold, Active

MPN 2-332095-2
Active

TE Connectivity AMP Connectors Series 1 PCB Pin Socket, 2-332095-2, solder termination, gold 30µin over beryllium copper contact, accepts 0.013"-0.020" pin diameter, -65°C-126°C, Bulk package.

$1.1900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
Series1
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2-332095-2 specifications
ParameterValue
Series1
Tail typeNo Tail
Mounting hole diameter0.041\" (1.04mm)
Operating temperature-65°C~126°C
Socket depth0.165\" (4.19mm)
Contact materialBeryllium Copper
PackageBulk
FeaturesKnockout Bottom
TerminationSolder
Contact finishGold
Flange diameter0.059\" (1.50mm)
Length - overall0.178\" (4.52mm)
Accepts pin diameter0.013\" ~ 0.020\" (0.33mm ~ 0.51mm)
Contact finish thickness30.0µin (0.76µm)

Product details

Gold-on-BeCu Contact for High-Cycle Signal Duty

The 2-332095-2 is a PCB pin socket from TE Connectivity's Series 1, designed to accept a mating pin diameter of 0.013" to 0.020" (0.33mm to 0.51mm). This is a signal-level socket, not a power contact; the narrow pin range and fine gold suit low-level circuits where contact resistance stability matters.

Solder Termination with No Tail — Board-Mount Fit

Termination is solder only, with a "No Tail" design — the socket sits flush in the plated through-hole, and the solder joint is made at the bottom of the hole. The mounting hole diameter is 0.041" (1.04mm), and the overall length is 0.178" (4.52mm) with a socket depth of 0.165" (4.19mm). The flange diameter is 0.059" (1.50mm), which acts as a stop against the board surface during insertion. This is a press-in-then-solder part; there is no press-fit interference retention.

It is RoHS compliant.

Knockout Bottom Feature for Panel Feed-Through

The socket includes a "Knockout Bottom" feature — the bottom of the socket body can be punched out to allow the mating pin to pass through the socket and extend beyond the board. This is useful when the pin must protrude for a secondary connection or when the socket is used as a feed-through in a panel or board stack.

MPN
2-332095-2