Skip to main content
TE Connectivity AMP Connectors 2213614-1

TE Connectivity 2213614-1 Hermaphroditic Connector, 2 Pos

MPN 2213614-1
Active

TE Connectivity, Hermaphroditic Blade and Receptacle, 2213614-1, 2 positions, 0.157" (4.00mm) pitch, 6A, 125V, gold contact finish, locking ramp, right-angle SMT.

$1.4400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2213614-1 specifications
ParameterValue
MountingBoard Cutout, Surface Mount, Right Angle
Connector typeBlade and Receptacle, Hermaphroditic
Fastening typeLocking Ramp
Voltage rating125V
Current rating6A
Operating temperature-40°C ~ 105°C
Housing colorNatural
Contact materialCopper Alloy
Housing materialLiquid Crystal Polymer (LCP)
Pitch0.157\" (4.00mm)
StyleBoard to Board or Cable
PackageTape & Reel (TR) Cut Tape (CT)
TerminationSolder
Contact finishGold
Positions2

Product details

Hermaphroditic 2-Position Power/Signal Connector

The 0.157" (4.00mm) pitch gives enough clearance for a 6A per-contact current rating at 125V without crowding the board, and the gold contact finish handles repeated mate cycles in field-service or production environments.

What Bolts In — Same Pitch, Same Pinout

The sibling 1-2213614-1 carries identical specs — 0.157" pitch, 2 positions, 6A, 125V, gold contacts, locking ramp, right-angle SMT. For a line-down replacement, either works; pick the reel if your pick-and-place feeds tape, grab the box for bench work.

Board Layout Fit — Right-Angle SMT with Cutout

Mounts board cutout, surface mount, right angle — the SMT tails solder to the board face while the cutout locates the connector body. The 4.00mm pitch means the two contact pads sit 4.00mm apart center-to-center, so the footprint is wider than a 2.54mm-pitch header. The locking ramp faces outward from the board edge, accessible for manual release. The LCP housing stands up to reflow temperatures without distortion.

MPN
2213614-1