Hermaphroditic 2-Position Power/Signal Connector
The 0.157" (4.00mm) pitch gives enough clearance for a 6A per-contact current rating at 125V without crowding the board, and the gold contact finish handles repeated mate cycles in field-service or production environments.
What Bolts In — Same Pitch, Same Pinout
The sibling 1-2213614-1 carries identical specs — 0.157" pitch, 2 positions, 6A, 125V, gold contacts, locking ramp, right-angle SMT. For a line-down replacement, either works; pick the reel if your pick-and-place feeds tape, grab the box for bench work.
Board Layout Fit — Right-Angle SMT with Cutout
Mounts board cutout, surface mount, right angle — the SMT tails solder to the board face while the cutout locates the connector body. The 4.00mm pitch means the two contact pads sit 4.00mm apart center-to-center, so the footprint is wider than a 2.54mm-pitch header. The locking ramp faces outward from the board edge, accessible for manual release. The LCP housing stands up to reflow temperatures without distortion.