Skip to main content
TE Connectivity AMP Connectors 3-640599-4

TE MTA-156 3-640599-4, 4-Pos IDC Receptacle, 0.156" Pitch

MPN 3-640599-4
Active

TE Connectivity MTA-156 series, 3-640599-4, 4-position single-row receptacle, 0.156" (3.96mm) pitch, IDC termination, 18 AWG, tin contacts, locking ramp, free-hanging, orange housing.

$0.6200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesMTA-156
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

3-640599-4 specifications
ParameterValue
SeriesMTA-156
Wire typeDiscrete or Ribbon Cable
TypeFemale Socket
MountingFree Hanging (In-Line)
Connector typeReceptacle
Fastening typeLocking Ramp
Wire gauge18 AWG
Cable terminationIDC
ColorOrange
Pitch0.156\" (3.96mm)
PackageBulk
FeaturesFeed Through
Contact finishTin
Rows1
Positions4
Contact finish thickness80.0µin (2.03µm)

Product details

The 3-640599-4: It terminates discrete or ribbon cable via IDC — no crimping, the wire insulation is punched directly into the slot. The 0.156" (3.96mm) pitch matches the MTA-156 header family, so the board footprint is set by that spacing. The orange housing is a visual identifier on the harness, not a functional spec.

IDC termination and wire gauge — what fits

This receptacle is specced for 18 AWG wire — that's a single gauge, so the slot width is fixed. Use the correct insulation OD for MTA-156 tooling; too thick and the wire won't seat, too thin and the grip is loose. The feed-through feature lets the wire pass straight through the housing, useful for daisy-chaining in a harness.

Locking ramp keeps the pair mated

It's a positive latch — you hear it click. For a wire-to-board connection in a moving assembly or moderate vibration, that latch holds the pair together without a secondary lock. The free-hanging mount means this receptacle is the cable side; the header is the board-mount half.

Tin contacts — 80.0µin thick for repeated mates

That's a thick tin layer — standard flash tin is around 30-50µin. The extra thickness buys more insertion cycles before the tin wears through and exposes the base metal. It's still a tin-to-tin interface, so the mating cycle life is lower than gold, but for a connector that sees occasional unmate-and-remate in service (not daily cycling), this plating is cost-effective. Tin is also the standard for MTA-156, so mixing tin receptacle with tin header is the intended match.

Mating with the MTA-156 header

The header is typically board-mount (vertical or right-angle) with the same locking ramp. The 18 AWG IDC termination is the receptacle side; the header side accepts the same gauge wire or board trace. No adapter or conversion is needed — straight MTA-156 to MTA-156.

MPN
3-640599-4