Skip to main content
TE Connectivity AMP Connectors 5-103976-2

TE Connectivity 5-103976-2 AMPMODU MTE, 3 Pos IDC Receptacle

MPN 5-103976-2
Active

TE Connectivity AMPMODU MTE, Receptacle, 3 Positions, 1 Row, 0.100" (2.54mm) Pitch, IDC, 22-26 AWG, Gold 30.0µin, Free Hanging, Black, Closed End.

$1.4763 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesAMPMODU MTE
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5-103976-2 specifications
ParameterValue
SeriesAMPMODU MTE
Wire typeRibbon Cable
TypeFemale Socket
MountingFree Hanging (In-Line)
Connector typeReceptacle
Wire gauge22-26 AWG
Cable terminationIDC
ColorBlack
Pitch0.100\" (2.54mm)
PackageTube
FeaturesClosed End
Contact finishGold
Rows1
Positions3
Contact finish thickness30.0µin (0.76µm)

Product details

IDC Receptacle for 0.100" Ribbon Cable — 3-Position, Closed End

The 0.100" (2.54mm) pitch matches the industry-standard 0.100" pin header footprint and ribbon cable conductor spacing, making this a drop-in interconnect for parallel data or low-current signal harnesses. The Closed End feature blocks one side of the IDC slot — the ribbon cable inserts from the open end only, ensuring the conductors register squarely over the insulation-displacement contacts and preventing a stub from forming on the far side. The housing is black, free-hanging (in-line), and accepts a single row of contacts.

This receptacle mates with a 0.100" (2.54mm) pitch pin header — typically the AMPMODU MTE header series or any industry-standard 0.100" square-pin header. The free-hanging receptacle is the cable-side half; the header is board-mounted. The IDC termination requires a ribbon cable with 22-26 AWG conductors on 0.100" centers. A standard IDC press tool (hand or pneumatic) is used to push the ribbon into the slot; the Closed End acts as a positive stop, so the cable cannot over-travel. The 3-position count is fixed — the receptacle is a single-row, 3-circuit member of the AMPMODU MTE family. For a different circuit count, select the corresponding 103976-base number with the desired position count. The Tube packaging is typical for IDC receptacles; parts are loaded in a tube for hand or auto-insertion into the press tool.

MPN
5-103976-2