Sealed 3-Position Power Interconnect for Harsh Environments
It accepts pin contacts via crimp termination and mounts free-hanging (in-line), making it a straightforward fit for harness assemblies that need to route power through a sealed junction. The 0.098" (2.50mm) pitch keeps the footprint compact while maintaining enough creepage for the 400V rating.
IP67 Sealing and Vibration-Resistant Latch
Current and Voltage — What the Ratings Mean
The dual current rating of 3.5A and 5A reflects a temperature derating curve — expect 5A per contact at lower ambient temperatures, dropping to 3.5A as the housing approaches its 105°C upper operating limit. The 400V voltage rating is high for a 3-position connector of this size, indicating the SlimSeal series was designed with creepage and clearance for power distribution, not just low-voltage signal. The 30 mating cycles are typical for a sealed connector — the IP gaskets compress and wear with each mate, so plan for limited field-service reconnects.
It accepts TE pin contacts — the exact contact part numbers are listed in the SlimSeal application tooling drawing. Crimp termination means you'll need the correct die set for the wire gauge range specified in the contact datasheet. The free-hanging mount gives flexibility in harness routing, but the latch holder must be fully engaged for the IP67 seal to close.