Skip to main content
TE Connectivity AMP Connectors 1-2834075-3

TE 1-2834075-3 SlimSeal Receptacle Housing, 3 Pos, IP67

MPN 1-2834075-3
Active

TE Connectivity SlimSeal receptacle housing, 3 positions, 0.098" (2.50mm) pitch, IP67, crimp termination, 400V, 3.5A/5A, white PBT, free hanging.

$0.8000 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-2834075-3 specifications
ParameterValue
SeriesSlimSeal
MountingFree Hanging (In-Line)
Connector typeReceptacle Housing for Pin Contact
Fastening typeLatch Holder
Voltage rating400V
Current rating3.5A, 5A
IP ratingIP67 - Dust Tight, Waterproof
Operating temperature-40°C ~ 105°C
Housing colorWhite
Housing materialPolybutylene Terephthalate (PBT)
Pitch0.098\" (2.50mm)
StyleCable/Wire to Cable/Wire
PackageTray
TerminationCrimp
Mating cycles30
Positions3

Product details

Sealed 3-Position Power Interconnect for Harsh Environments

It accepts pin contacts via crimp termination and mounts free-hanging (in-line), making it a straightforward fit for harness assemblies that need to route power through a sealed junction. The 0.098" (2.50mm) pitch keeps the footprint compact while maintaining enough creepage for the 400V rating.

IP67 Sealing and Vibration-Resistant Latch

Current and Voltage — What the Ratings Mean

The dual current rating of 3.5A and 5A reflects a temperature derating curve — expect 5A per contact at lower ambient temperatures, dropping to 3.5A as the housing approaches its 105°C upper operating limit. The 400V voltage rating is high for a 3-position connector of this size, indicating the SlimSeal series was designed with creepage and clearance for power distribution, not just low-voltage signal. The 30 mating cycles are typical for a sealed connector — the IP gaskets compress and wear with each mate, so plan for limited field-service reconnects.

It accepts TE pin contacts — the exact contact part numbers are listed in the SlimSeal application tooling drawing. Crimp termination means you'll need the correct die set for the wire gauge range specified in the contact datasheet. The free-hanging mount gives flexibility in harness routing, but the latch holder must be fully engaged for the IP67 seal to close.

MPN
1-2834075-3