Skip to main content
Molex 0010081031

Molex 0010081031 KK508 Header, 3 Pos, 5.08mm, Tin, Active

MPN 0010081031
Active

Molex KK508, 3003 series, unshrouded header, 3 positions, 0.200" (5.08mm) pitch, through-hole solder termination, tin-plated male pins, natural nylon housing, UL94 V-2.

$0.4900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesKK508, 3003
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

0010081031 key specifications
ParameterValue
SeriesKK508, 3003
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typePush-Pull
Contact materialBrass
Insulation colorNatural
Insulation height0.125\" (3.18mm)
Insulation materialPolyamide (PA), Nylon
Material flammability ratingUL94 V-2
StyleBoard to Board or Cable
PackageBulk

All specifications

0010081031 additional specifications
ParameterValue
ShroudingUnshrouded
TerminationSolder
ApplicationsGeneral Purpose, Industrial, Telecommunications
Contact shapeCircular
Rows1
Pitch0.200\" (5.08mm)
Positions3
Contact finish - postTin
Contact length - post0.155\" (3.94mm)
Overall contact length0.750\" (19.05mm)
Contact finish - matingTin
Contact length - mating0.470\" (11.94mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

0.200" Pitch, 3-Position Unshrouded Header

The 0010081031: Tin-plated brass pins, 100 µinch thick on both the mating and solder-post surfaces, handle moderate reconnect duty in dry indoor environments. This is fine for low-vibration, bench-level or panel wiring where the mating half is aligned manually. The push-pull fastening type keeps insertion and extraction simple, no latch to cycle.

Tin Plating and 100 µinch Thickness

Both the mating contact and the solder post carry 100 µinch of tin over the brass base metal. Tin is the workhorse for cost-sensitive, moderate-cycle applications — expect several hundred mating cycles before fretting becomes a concern in clean, dry air. The 100 µinch thickness is on the high side for tin, giving a bit more margin against corrosion in non-sealed environments.

It is ROHS3 compliant, clearing the EU material restriction gate for new designs.

MPN
0010081031