Skip to main content
Molex 0917160001

Molex Appli-Mate 91716 0917160001, 3-Pos IDC Receptacle

MPN 0917160001
Active

Molex Appli-Mate 91716 receptacle, 3 positions, 1 row, 2.50mm pitch, IDC termination, tin contacts, 22-24 AWG, free-hanging right-angle.

$0.3700 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesAppli-Mate 91716
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

0917160001 specifications
ParameterValue
SeriesAppli-Mate 91716
Wire typeDiscrete
TypeOuter Shroud Contact
MountingFree Hanging (In-Line), Right Angle
Connector typeReceptacle
Wire gauge22-24 AWG
Cable terminationIDC
ColorNatural
Pitch0.098\" (2.50mm)
PackageTray
Contact finishTin
Rows1
Positions3

Product details

3-Position IDC Receptacle for 22-24 AWG Discrete Wire

The Molex 0917160001 is a 3-circuit receptacle from the Appli-Mate 91716 series, designed for mass-terminating discrete 22-24 AWG wire using an IDC (insulation displacement) slot — no stripping, no crimping. Tin-plated outer shroud contacts handle the connection; the free-hanging, right-angle orientation lets the wire exit parallel to the mating face, useful for tight cable routing against a panel or housing wall.

What the IDC Termination Means for Assembly

The trade-off is that the wire gauge must match the slot: 22-24 AWG is the range here. Tin plating on the contacts is adequate for a few mate-unmate cycles in a clean, dry environment; it is not rated for repeated field servicing or corrosive atmospheres. The natural (uncolored) housing is the standard finish for this series.

Mating and Harness Fit

The 3-position, single-row layout means the mating connector carries three pins on a 2.50 mm pitch. No special tool is required beyond a standard IDC press — the same hand tool or arbor press that seats the wire into the slot also closes the housing latch.

It is ROHS3 compliant.

MPN
0917160001