Skip to main content
TE Connectivity AMP Connectors 1-1534072-8

TE 1-1534072-8 Mark II IDC Receptacle, 8 Pos, 5.00 mm

MPN 1-1534072-8
Active

TE Connectivity Mark II IDC receptacle, 8 positions, 1 row, 0.197" (5.00 mm) pitch, tin blade pin contacts, latch lock, free-hanging, Natural, Bulk.

$3.0500 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesMark II
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-1534072-8 specifications
ParameterValue
SeriesMark II
Wire typeDiscrete
TypeBlade Pin
MountingFree Hanging (In-Line)
Connector typeReceptacle
Fastening typeLatch Lock
Cable terminationIDC
ColorNatural
Pitch0.197\" (5.00mm)
PackageBulk
FeaturesDual Wire Exit
Contact finishTin
Rows1
Positions8

Product details

8-Position IDC Receptacle, 5.00 mm Pitch — TE Mark II

Tin-plated blade pin contacts are rated for the series' standard current; the tin finish is adequate for low mating-cycle duty where the connector is wired once and left mated. The latch lock snaps onto the mating header and holds against vibration without a secondary screw or clip. Free-hanging (in-line) mounting means it sits in the harness, not on the board — the wire exit is dual, so the cable can route either direction out of the back.

Active Production — Sourcing and Lifecycle

No last-time-buy or phase-out notice is on record. No official second-source or cross-reference is listed beyond the Mark II series itself.

Termination and Wire Prep — IDC Reality

IDC termination means no individual crimp terminals — the wire is laid into the slot and the connector is pressed down so the contacts slice through the insulation. This works with discrete wire (listed wire type: Discrete) and requires a hand press or bench tool, not a crimp die. The dual wire exit lets the cable exit either side of the connector body, which helps in tight harness routing.

MPN
1-1534072-8