Skip to main content
TE Connectivity AMP Connectors 1-163082-0

TE 1-163082-0 Multimate III+ Stamped Pin, 16-18 AWG, Gold

MPN 1-163082-0
Active

TE Connectivity Multimate III+ Stamped Pin, 1-163082-0, 16-18 AWG, Gold 30.0µin, Crimp, Brass, Bulk.

$1.0600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-163082-0 specifications
ParameterValue
TypeStamped
SeriesMultimate III+
Wire gauge16-18 AWG
Contact materialBrass
PackageBulk
Pin or socketPin
Contact finishGold
Contact terminationCrimp
Contact finish thickness30.0µin (0.76µm)

Product details

Multimate III+ Stamped Pin, 16-18 AWG

This is the male half — a pin, not a socket — terminated by crimping onto 16-18 AWG wire.

Where It Fits and What It Needs

This pin loads into any Multimate III+ housing cavity designed for a stamped contact — the same cavities that accept the machined versions, so you can mix stamped and machined pins in one housing as long as the wire gauge matches. The 16-18 AWG range covers most power and signal circuits in a typical panel or harness. There is no pre-loaded carrier; each pin is loose in bulk pack, so you feed it into the crimp applicator or hand tool one at a time.

That means it is still a standard catalog line from TE, not a surplus-only scavenge.

MPN
1-163082-0