Skip to main content
TE Connectivity AMP Connectors 1-282856-2

TE Buchanan 1-282856-2, 12-Position 5mm PCB Terminal Block

MPN 1-282856-2
Active

TE Connectivity Buchanan series, 1-282856-2, 12-position PCB terminal block, 5.00 mm pitch, 24 A, 300 V, through-hole, rising cage clamp, side interlocking, green housing.

$7.5600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-282856-2 key specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current24 A
Wire gauge12-30 AWG
Wire terminationScrew - Rising Cage Clamp
ColorGreen
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingBrass - Nickel Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated
Pitch0.197\" (5.00mm)

All specifications

1-282856-2 additional specifications
ParameterValue
PackageBulk
FeaturesInterlocking (Side)
Screw threadM3
Torque - screw0.79 Nm (7.0 Lb-In)
Number of levels1
Mating orientationHorizontal with Board
Positions per level12

Product details

It terminates wires via a rising cage clamp — the screw drives a brass clamp plate up inside the housing, trapping the conductor against the current bar without twisting the wire. Rated 24 A at 300 V, it's built for power distribution inside control cabinets, panel wiring, and industrial equipment where you need a screw-terminated field connection on the PCB. The green polyamide 6/6 housing carries the side interlocking feature, so multiple blocks snap together to build wider assemblies on the same pitch.

The 24 A per-circuit rating assumes the full cross-section of the current path, not just the contact; at that current the temperature rise in the PA66 housing stays within the material's continuous-use limit.

Termination and Torque — What the Screw Setting Means

The rising cage clamp accepts wire from 12 AWG down to 30 AWG. The specified torque is 0.79 Nm (7.0 Lb-In) — that's the setting that pulls the clamp plate up far enough to grip the conductor without stripping the M3 brass screw. Under-torque it and the connection can loosen under thermal cycling; over-torque it and you risk cracking the housing or stripping the thread. The clamp plate and screw are both brass with nickel plating, which resists corrosion in cabinet environments.

MPN
1-282856-2