Skip to main content
TE Connectivity AMP Connectors 1-66361-1

TE Connectivity 1-66361-1 Multimate III+ Stamped Pin

MPN 1-66361-1
Active

TE Connectivity Multimate III+ series, 1-66361-1, stamped pin contact, crimp termination, 14-18 AWG, gold 30.0µin (0.76µm) finish, brass, bulk.

$1.4200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-66361-1 specifications
ParameterValue
TypeStamped
SeriesMultimate III+
Wire gauge14-18 AWG
Contact materialBrass
PackageBulk
Pin or socketPin
Contact finishGold
Contact terminationCrimp
Contact finish thickness30.0µin (0.76µm)

Product details

Crimp pin for Multimate III+ housings

Wire and crimp fit

This pin accepts 14-18 AWG stranded wire. The stamped construction gives a consistent cross-section across the crimp zone, which matters when the wire bundle is routed into a tight enclosure and the termination sees vibration.

Plating grade and mating cycle life

Standard gold flash (under 15 µ") is fine for a few mate-unmate cycles in a factory build; 30.0µin gold is rated for repeated field engagement — think a power supply swapped out annually or a test fixture cable that gets reconnected weekly. The brass substrate under the gold provides the spring force in the stamped beam; the gold layer prevents oxide buildup that would raise contact resistance over time.

MPN
1-66361-1