Skip to main content
TE Connectivity AMP Connectors 1-84534-2

1-84534-2 TE Connectivity FFC Connector, 12 Pos, 1.25mm

MPN 1-84534-2
Active

TE Connectivity AMP Connectors 1-84534-2, FFC vertical connector, 12 positions, 0.049" (1.25mm) pitch, through-hole kinked pin termination, tin-plated phosphor bronze contacts, 1 A, 50 V, -40°C to 85°C, white PBT glass-filled housing.

$0.7100 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-84534-2 specifications
ParameterValue
MountingThrough Hole
Cable end typeTapered
Flat flex typeFFC
Connector (Contact type)Contacts, Vertical - 1 Sided
Voltage rating50V
Current rating1A
Operating temperature-40°C~85°C
Housing colorWhite
Contact materialPhosphor Bronze
Housing materialPolybutylene Terephthalate (PBT), Glass Filled
Height above board0.307\" (7.80mm)
Pitch0.049\" (1.25mm)
PackageTray
TerminationKinked Pin
Contact finishTin
FFC, FCB thickness0.30mm
Positions12

Product details

Board Fit and Cable Match

The 1-84534-2: This is a 12-position vertical FFC connector on a 1.25 mm pitch — the footprint takes up about 15 mm of board edge. The through-hole kinked pins anchor it better than an SMT part would in a board that sees vibration or repeated cable insertions. It accepts 0.30 mm thick FFC with a tapered end, and the contact style is 1-sided — the cable's conductor pads must face the contact beam side. Tin plating on the contacts keeps cost down, but if the connector will be mated more than a few dozen times, consider a gold-plated sibling for longer contact life.

Current and Temperature Limits

The housing is glass-filled PBT, which holds its shape through wave solder and gives a UL94 V-0 flame rating. The 7.80 mm height above board leaves room underneath for passives on the opposite side, but check your z-height budget against tall components nearby.

MPN
1-84534-2