Skip to main content
TE Connectivity AMP Connectors 1986660-3

TE Connectivity 1986660-3, 3-Position Terminal Block, 65 A

MPN 1986660-3
Active

TE Connectivity, 1986660-3, 3-position side-entry PCB terminal block, 0.400" (10.16 mm) pitch, 65 A, 300 V, screw termination, through-hole, green PA66 housing, 6-26 AWG.

$10.9100 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1986660-3 specifications
ParameterValue
MountingThrough Hole
Voltage300 V
Current65 A
Wire gauge6-26 AWG
Wire terminationScrew
Operating temperature-40°C ~ 105°C
ColorGreen
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingBrass - Nickel Plated
Screw material - platingSteel - Zinc Plated
Pitch0.400\" (10.16mm)
PackageBulk
FeaturesInterlocking (Side)
Screw threadM4
Torque - screw2.26 Nm (20 Lb-In)
Number of levels1
Mating orientationHorizontal with Board
Positions per level3

Product details

Side-Entry Power Terminal Block, 3 Positions, 10.16 mm Pitch

The TE Connectivity 1986660-3 is a 3-position, single-level PCB terminal block with side wire entry, built on a 0.400" (10.16 mm) pitch. It is the 3-position member of the 1986660 series, designed for through-hole soldering to a PCB. Screw termination with a specified torque of 2.26 Nm (20 Lb-In) secures wire from 6 AWG down to 26 AWG.

65 A per Circuit — Bus-Level Current on a PCB

The M4 screw and nickel-plated brass clamp are sized to cinch down on 6 AWG stranded copper without damaging the strands — the 2.26 Nm torque spec is not a suggestion; under-torquing leaves a high-resistance joint that heats, over-torquing strips the thread or cracks the housing.

The clamp accepts 6-26 AWG, which covers everything from a 13 mm² power feed down to a signal-level control wire. The screw clamp is field-serviceable — strip, insert, torque — no crimp die needed.

MPN
1986660-3