Skip to main content
TE Connectivity AMP Connectors 2301826-2

TE 2301826-2 AMPLIMITE HD-20 D-Sub Plug, 9 Pos, 1.5A

MPN 2301826-2
Active

TE Connectivity AMPLIMITE HD-20 D-Sub plug, 2301826-2, 9 positions, 2 rows, 1.5A per contact, 250V, through-hole solder, gold-plated contacts, board lock, grounding indents, female screwlock 4-40.

$2.2800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesAMPLIMITE HD-20
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2301826-2 key specifications
ParameterValue
SeriesAMPLIMITE HD-20
TypeSignal
MountingThrough Hole
Connector typePlug, Male Pins
Voltage rating250V
Current rating1.5A
Shell size, connector layout1 (DE, E)
Operating temperature-55°C ~ 105°C
ColorBlack
Contact materialBrass
Dielectric materialPolybutylene Terephthalate (PBT), Glass Filled
Shell material, finishSteel, Tin-Nickel Plated

All specifications

2301826-2 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
PackageTray
FeaturesBoard Lock, Grounding Indents
TerminationSolder
Contact finishGold
Flange featureMating Side, Female Screwlock (4-40)
Rows2
Positions9
Contact finish thickness15.0µin (0.38µm)

Product details

9-Position D-Sub Plug for Signal Interconnects

It carries 1.5A per contact at 250V — a signal-level rating typical for standard-density D-subs, not a power bus. The shell is steel with a tin-nickel finish, and the housing uses a glass-filled PBT dielectric rated UL94 V-0. The flange carries female screwlocks (4-40) on the mating side, which means the plug secures directly to the receptacle with standard D-sub hardware — no adapter needed.

Board Lock and Grounding Indents — What They Do in Assembly

During wave soldering, they hold the connector square to the board — without them, the shell can tilt as the solder joints cool, pulling the pin tips out of alignment with the receptacle. For a 9-position plug this is less critical than on a 25-position, but it still saves rework on a dense board. Grounding indents on the shell face contact the receptacle shell before the signal pins mate. This bleeds electrostatic discharge and shield currents to ground before they reach the contacts — useful in environments with frequent plug/unplug cycles or nearby switching gear.

MPN
2301826-2