Skip to main content
TE Connectivity AMP Connectors 282868-3

TE Connectivity 282868-3 Buchanan Terminal Block, 5mm Pitch

MPN 282868-3
Active

TE Connectivity Buchanan 282868-3, terminal block, 3 positions per level, 2 levels, 0.197" (5.00mm) pitch, 13.5 A, 300 V, through hole, screw - rising cage clamp, green polyamide housing.

$4.4300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

282868-3 key specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current13.5 A
Wire gauge12-30 AWG
Wire terminationScrew - Rising Cage Clamp
Operating temperature-40°C ~ 105°C
ColorGreen
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingBrass - Nickel Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated

All specifications

282868-3 additional specifications
ParameterValue
Pitch0.197\" (5.00mm)
PackageBulk
FeaturesInterlocking (Side)
Screw threadM3
Torque - screw0.68 Nm (6 Lb-In)
Number of levels2
Mating orientationHorizontal with Board
Positions per level3

Product details

Terminal Block for PCB Power Distribution

The TE Connectivity Buchanan 282868-3 is a two-level PCB-mount terminal block with 3 positions per level, giving 6 total circuits in a single footprint. The 0.197" (5.00 mm) pitch is wider than typical signal-level blocks — the board layout needs to accommodate the spacing for the 13.5 A per-position current rating and the 300 V voltage rating. The green polyamide (PA66) housing carries the interlocking side feature, allowing multiple blocks to be ganged side-by-side on the same assembly without gaps.

Termination and Torque

Wire termination is via a screw - rising cage clamp, accepting 12-30 AWG wire. The M3 screw has a specified torque of 0.68 Nm (6 Lb-In) — exceeding this can strip the brass-nickel-plated screw or distort the cage. The clamp material is brass with nickel plating, and the contact material is brass with tin plating. The mating orientation is horizontal with the board, meaning the wire entry is parallel to the PCB surface.

MPN
282868-3