Skip to main content
TE Connectivity AMP Connectors 535090-4

TE 535090-4 Eurocard DIN 41612 Receptacle, 96 Pos

MPN 535090-4
Active

TE Connectivity Eurocard DIN 41612 receptacle, Style C, 96 positions, 3 rows, 0.100" (2.54 mm) pitch, through-hole solder, gold 30.0 µ" contacts, UL94 V-0.

$6.6900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS non-compliant
IncotermsDAP / DDP Available
SeriesEurocard
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

535090-4 specifications
ParameterValue
SeriesEurocard
MountingThrough Hole
Connector typeReceptacle, Female Sockets
Operating temperature-55°C ~ 125°C
Material - insulationPolyester, Glass Filled
Material flammability ratingUL94 V-0
Pitch0.100\" (2.54mm)
StyleC
PackageBulk
TerminationSolder
Level, class2
Contact finishGold
Rows3
Positions96
Contact finish thickness30.0µin (0.76µm)

Product details

DIN 41612 C-Style Backplane Receptacle

The board-side keep-out must accommodate the full 96-position pattern, and the hole diameter should match the solder tail dimensions per the product drawing.

Position Count and Row Configuration

At 96 positions loaded across three rows, this receptacle matches the standard DIN 41612 C-style pinout for 96-way backplane slots. The 535098-5 is a 120-position variant in the same Eurocard series, also three rows, for higher-density backplanes that need 24 additional signal or ground positions. Both 535090-5 and 535043-5 are 96-position receptacles identical in pitch, rows, and mounting, differing only in contact finish thickness — 535090-5 carries the same 30.0 µ" gold as the 535090-4, while 535043-5 uses a different plating grade. For a 96-position backplane slot, any of these three 96-position parts fits the same footprint; the choice comes down to the contact finish specification on the BOM.

Mating and Field Replacement

The 30.0 µ" gold contact finish is rated for repeated insertion cycles — typical for backplane applications where cards are swapped during maintenance or reconfiguration. The through-hole solder termination is not field-replaceable without desoldering; if a contact is damaged, the entire connector must be replaced. No locking mechanism is integrated into the receptacle itself; retention comes from the header's mounting hardware or the card cage guide rails.

MPN
535090-4