Skip to main content
TE Connectivity AMP Connectors 6116173-4

TE Connectivity 6116173-4 RJ45 Jack, 8P8C, Cat5, Shielded

MPN 6116173-4
Active

TE Connectivity modular jack, 8P8C (RJ45, Ethernet), Cat5, right-angle, through-hole, shielded with EMI finger, gold contacts, green/yellow LED.

$4.2500 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

6116173-4 specifications
ParameterValue
MountingThrough Hole
Connector typeJack
Operating temperature-40°C ~ 85°C
LED colorGreen - Yellow
Contact materialPhosphor Bronze
Housing materialThermoplastic
PackageTray
RatingsCat5
FeaturesBoard Guide
ShieldingShielded, EMI Finger
Orientation90° Angle (Right)
TerminationSolder
Tab directionUp
Contact finishGold
Rows1
Number of ports1
Contact finish thickness50.0µin (1.27µm)
Number of positions (Contacts)8p8c (RJ45, Ethernet)

Product details

Right-Angle RJ45 Jack with Integrated Status LED

A green/yellow LED is integrated into the jack body — one bicolor indicator for link/activity status without a separate PCB-mount LED. The tab direction is up, meaning the latch on the mating RJ45 plug faces away from the board. Gold contacts with 50.0 µin (1.27 µm) plating on phosphor bronze give the mating interface corrosion resistance and cycle life well beyond the typical service life of a Cat5 link. The thermoplastic housing carries a board guide to align the connector during hand-solder or wave-solder assembly.

The Cat5 rating means this jack is specified for 100 MHz signaling — sufficient for 100BASE-TX and 1000BASE-T (Gigabit Ethernet) over short to moderate cable runs. It is not rated for Cat5e or Cat6 frequencies (100 MHz and 250 MHz respectively with tighter crosstalk margins), so if the application calls for 10GBASE-T or Power over Ethernet at higher data rates, a Cat6a-rated jack is the correct choice. For standard office LAN, industrial Ethernet at 100 Mbps, or legacy 10/100 networks, the Cat5 rating is adequate and the EMI shielding handles the noise floor in an industrial cabinet.

Right-angle through-hole termination with a single row of positions plus shield solder tabs.

MPN
6116173-4