Skip to main content
TE Connectivity AMP Connectors NC6-P108-05

NC6-P108-05 Buchanan Barrier Strip, 5 Circuit, 0.375" Pitch

MPN NC6-P108-05
Active

Buchanan NC6 barrier strip, 5 circuits, 0.375" (9.53 mm) pitch, 20 A, 300 V, 1 row, through hole, screws with captive plate top termination, PC pin bottom, 12-22 AWG, black polyamide housing, UL94 V-0.

$4.3300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesNC6, Buchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

NC6-P108-05 key specifications
ParameterValue
SeriesNC6, Buchanan
Barrier type2 Wall (Dual)
MountingThrough Hole
Terminal block typeBarrier Block
Voltage rating300V
Current rating20A
Wire gauge12-22 AWG
Terminal screw finishZinc
Number of wire entries5
Terminal screw materialSteel
Operating temperature-40°C ~ 105°C
ColorBlack

All specifications

NC6-P108-05 additional specifications
ParameterValue
Material - insulationPolyamide (PA), Nylon
Material flammability ratingUL94 V-0
Pitch0.375\" (9.53mm)
PackageBulk
Rows1
Top terminationScrews with Captive Plate
Bottom terminationPC Pin
Number of circuits5

Product details

Five-Circuit Barrier Strip for Panel Wiring

The Buchanan NC6-P108-05 is a five-circuit barrier strip from the NC6 series, built for terminating individual field wires to a PCB or panel. The 0.375" (9.53 mm) pitch gives each circuit enough physical separation to handle the 20 A rating at 300 V without tracking between terminals — a common failure point on tighter-pitch blocks when the load is continuous. The dual-wall barrier design (2 Wall) adds creepage distance between adjacent terminals, which matters when the strip lives in a panel with 24/7 current draw and the insulation resistance needs to stay high over years of thermal cycling. Termination uses screws with captive plate on top — the plate stays captured in the screw, so there is no loose washer to drop into the panel during wiring. Wire range covers 12-22 AWG, which covers most control-circuit and moderate-power field wiring in industrial cabinets.

On a 0.325" or 0.300" pitch strip, 20 A would push the temperature rise close to the insulation limit in a still-air cabinet. The wider pitch here gives thermal headroom — the heat from each terminal has room to dissipate before it reaches the adjacent circuit. For a 5-circuit strip carrying 20 A on every position, the total heat load is about 10-15 W depending on contact resistance; the pitch and the polyamide housing handle that without the strip becoming a hot spot inside the enclosure. The 300 V rating is line-to-line on the strip, not line-to-ground. In a typical 120/240 VAC control panel, that is adequate for phase-to-phase wiring on a single strip. If the application runs 480 V phase-to-phase, this strip is not the right choice — the 300 V rating is the limit between adjacent circuits.

MPN
NC6-P108-05