Skip to main content
Samtec Inc. SMA-J-P-H-ST-EM1

Samtec SMA-J-P-H-ST-EM1 SMA Jack, 50 Ohm, 20 GHz, End Launch

MPN SMA-J-P-H-ST-EM1
Active

Samtec SMA-J-P-H-ST-EM1, SMA jack female socket, 50 Ohms, 20 GHz max, end launch board edge mount, threaded fastening, gold body, 335 V rating, 1 port, solder termination.

$5.4300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

SMA-J-P-H-ST-EM1 specifications
ParameterValue
MountingBoard Edge, End Launch
Connector typeJack, Female Socket
Fastening typeThreaded
Voltage rating335 V
Frequency - max20 GHz
Operating temperature-65°C ~ 125°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageTray
Impedance50 Ohms
Body finishGold
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

End-Launch SMA Jack for 20 GHz Signal Paths

The Samtec SMA-J-P-H-ST-EM1 is a 50 Ohm SMA jack, female socket, designed for board edge, end launch mounting. It handles signals up to 20 GHz, making it a fit for RF test fixtures, microwave modules, and high-frequency interconnect where the launch into the PCB trace must be clean. The threaded fastening ensures a vibration-resistant mate with standard SMA plug cable assemblies.

What the 20 GHz Ceiling Means for the Layout

The 20 GHz max frequency is the connector's usable bandwidth — beyond that, the return loss degrades and the signal launch becomes a mismatch. For a 50 Ohm system, the end launch footprint must be designed with a ground-plane cutout and trace width that matches the centre pin geometry; otherwise the 20 GHz rating is theoretical. The 335 V voltage rating covers most RF power levels, but the limiting factor at high frequency is the dielectric breakdown in the PTFE, not the air gap.

MPN
SMA-J-P-H-ST-EM1