Skip to main content
TE Connectivity AMP Connectors 2106056-2

TE 2106056-2 SlimSeal Header, 2 Pos, 0.138" Pitch, IP67

MPN 2106056-2
Active

TE Connectivity SlimSeal header, 2106056-2, 2 positions, 0.138" (3.50mm) pitch, right-angle SMT, IP67, latch lock, tin-plated brass contacts, rated 5A (18-20 AWG) / 3.5A (22-24 AWG), 400V.

$7.5500 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2106056-2 key specifications
ParameterValue
SeriesSlimSeal
MountingSurface Mount, Right Angle
Connector typeHeader, Male Pins
Fastening typeLatch Lock
Voltage rating400V
Current rating3.5A (22-24AWG); 5A (18-20 AWG)
IP ratingIP67 - Dust Tight, Waterproof
Operating temperature-40°C ~ 105°C
Housing colorBlack
Contact materialBrass
Housing materialLiquid Crystal Polymer (LCP)
Pitch0.138\" (3.50mm)

All specifications

2106056-2 additional specifications
ParameterValue
StyleBoard to Cable/Wire
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention
TerminationSolder
Mating cycles30
Contact finishTin
Positions2

Product details

Board-Mount Reality: Right-Angle SMT with IP67 Sealing

The TE Connectivity SlimSeal 2106056-2 is a 2-position header with male pins, designed for board-to-cable/wire applications. What sets this header apart from a standard unsealed part is the IP67 rating — dust-tight and waterproof when mated with the matching SlimSeal receptacle. That makes it a candidate for outdoor LED lighting, washdown sensors, or any assembly that sees hose spray or condensation.

Current Rating: Wire-Gauge Dependent

With 18-20 AWG wire the header is rated 5A per circuit; drop to 22-24 AWG and the rating falls to 3.5A per circuit. That derating reflects the IR drop and temperature rise in the smaller conductor, not the contact itself. For a 2-position connector, the total current through the pair is double the per-circuit figure, but the wire gauge must match the load on each pin.

Mating Cycles: Semi-Permanent Interconnect

Rated for 30 mating cycles, this header is not intended for frequent disconnect/reconnect — think of it as a semi-permanent interconnect inside a luminaire or a sealed junction box. The tin-plated brass contacts are adequate for that cycle count; if the application requires hundreds of matings, a gold-plated alternative would be needed.

MPN
2106056-2