Skip to main content
TE Connectivity AMP Connectors 2106135-4

TE 2106135-4 SlimSeal Plug Housing, 4-Pos, IP67

MPN 2106135-4
Active

TE Connectivity SlimSeal plug housing for socket contact, 2106135-4, 4 positions, 0.138" (3.50mm) pitch, IP67, 400V, 3.5-5A, crimp termination, free hanging.

$3.3100 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2106135-4 specifications
ParameterValue
SeriesSlimSeal
MountingFree Hanging (In-Line)
Connector typePlug Housing for Socket Contact
Fastening typeLatch Lock
Voltage rating400V
Current rating3.5A (22-24AWG); 5A (18-20 AWG)
IP ratingIP67 - Dust Tight, Waterproof
Operating temperature-40°C ~ 105°C
Housing colorBlack
Housing materialPolycarbonate (PC)
Pitch0.138\" (3.50mm)
StyleCable/Wire to Cable/Wire or Board
PackageBulk
TerminationCrimp
Mating cycles30
Positions4

Product details

SlimSeal Plug Housing for Sealed Harness Builds

The 2106135-4: The 0.138" (3.50mm) pitch sets the centerline spacing for the mating receptacle and crimp terminals, so the harness layout matches the connector footprint. Rated IP67 Dust Tight, Waterproof, this housing seals the mated pair against moisture and particulate ingress — suited for outdoor lighting, agricultural equipment, or washdown-area harnesses where a standard unsealed connector would fail.

Current Rating Depends on Wire Gauge

The current rating is wire-gauge dependent: 3.5A per contact with 22-24 AWG wire, and 5A per contact with 18-20 AWG wire. That means the harness builder selects the terminal and wire section to match the load — a 5A circuit needs the heavier 18-20 AWG range, while a 3.5A signal line can use finer 22-24 AWG. The 400V voltage rating gives ample headroom for low-voltage DC or 277VAC lighting circuits.

30 Mating Cycles — Sealed, Not for Frequent Reconnect

Rated for 30 mating cycles, this housing is built for a one-time assembly or occasional field disconnect — not daily plug/unplug duty.

MPN
2106135-4