Skip to main content
TE Connectivity AMP Connectors 284511-4

TE 284511-4 Terminal Block Plug 4POS 3.81mm Pitch

MPN 284511-4
Active

TE Connectivity AMP Connectors Buchanan series, 284511-4, Plug, Female Sockets, 4 positions, 0.150" (3.81mm) pitch, free hanging, screw - rising cage clamp, 11 A, 300 V, UL94 V-0, green housing.

$6.2400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

284511-4 key specifications
ParameterValue
TypePlug, Female Sockets
SeriesBuchanan
MountingFree Hanging (In-Line)
Voltage - UL300 V
Current - UL11 A
Plug wire entry180°
Wire strip length5-6mm
Wire gauge or range - AWG14-30 AWG
Wire gauge or range - mm20.05-2mm²
Operating temperature-40°C ~ 110°C
ColorGreen
Contact materialPhosphor Bronze

All specifications

284511-4 additional specifications
ParameterValue
Housing materialPolyamide (PA66), Nylon 6/6
Insulation height0.437\" (11.10mm)
Material flammability ratingUL94 V-0
Pitch0.150\" (3.81mm)
PackageBulk
FeaturesMating Flange
Screw sizeM2
Torque - screw0.31 Nm (2.7 Lb-In)
Number of levels1
Termination styleScrew - Rising Cage Clamp
Positions4
Positions per level4
Contact mating finishTin

Product details

The 284511-4 is a 4-position plug from the TE Buchanan series, built as the wire-side mating half for a 3.81mm pitch header. It terminates stranded or solid wire with a screw-driven rising cage clamp — no crimp tool needed, just a standard screwdriver. Rated 11 A at 300 V, it handles moderate power for control cabinet wiring, sensor/actuator connections, and panel I/O. The plug accepts 14-30 AWG wire (0.05-2 mm²) with a 5-6mm strip length. The rising cage clamp pulls the wire against a current bar — the screw torque spec is 0.31 Nm (2.7 Lb-In), which is light enough that you feel the wire bite without over-torquing the housing.

Strip the wire to 5-6mm, insert it into the clamp opening, and tighten the M2 screw to 0.31 Nm. The rising cage lifts and pinches the conductor against the contact. The plug entry is 180° straight, so the wire exits in line with the plug body. The mating flange (feature) locks the plug to the header, preventing vibration from backing the connection loose.

MPN
284511-4