Skip to main content
TE Connectivity AMP Connectors 61097-1

61097-1 TE Connectivity Single Post Pin Tin Clinch Fit Bulk

MPN 61097-1
Active

TE Connectivity AMP Connectors 61097-1, a non-insulated single-post pin, tin-plated phosphor bronze, clinch-fit through-hole mount, bulk package, rated for 0.062" (1.57mm) board thickness, 0.058" (1.47mm) diameter pin above flange.

$0.2900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

61097-1 specifications
ParameterValue
MountingThrough Hole
Terminal typeSingle Post
Mounting hole diameter0.067\" ~ 0.073\" (1.70mm ~ 1.85mm)
Terminal styleFlanged
Contact materialPhosphor Bronze
PackageBulk
InsulationNon-Insulated
TerminationClinch Fit
Contact finishTin
Board thickness0.062\" (1.57mm)
Flange diameter0.090\" (2.29mm)
Length - overall0.325\" (8.26mm)
Length - above flange0.160\" (4.06mm)
Length - below flange0.100\" (2.54mm)
Pin size - above flange0.058\" (1.47mm) Dia

Product details

Single-post pin for staking into a PCB

The tin-plated phosphor bronze contact carries signal or low-current power and is intended for applications where the pin is soldered into the board and sees infrequent mating cycles — tin is the economical choice when the mating interface is not repeatedly cycled. The pin measures 0.325" (8.26mm) overall length, with 0.160" (4.06mm) standing above the flange and 0.100" (2.54mm) below. The flange diameter is 0.090" (2.29mm), and the above-flange pin diameter is 0.058" (1.47mm). It accepts a board thickness of 0.062" (1.57mm) nominal and requires a mounting hole between 0.067" and 0.073" (1.70mm to 1.85mm) in diameter. The clinch-fit termination stakes the pin into the plated through-hole without solder — the interference fit holds it during wave-solder or hand-solder assembly.

The part ships in bulk (loose pieces) rather than tape-and-reel — expect hand-insertion or vibratory-feeder handling for automated placement.

MPN
61097-1