The Amphenol FCI 68024-124HLF is the 24-circuit member of the BERGSTIK II single-row 0.100-inch board-to-board header series — an unshrouded push-pull through-hole header with gold-plated phosphor bronze contacts rated 5 A per circuit at up to 110 V. The post extends 0.150 inch for through-hole solder termination, and the full mated contact engagement reaches 0.318 inch — the 0.100-inch insulation height keeps the header seated flush in the board stack. All 24 positions are loaded. Contact finish is either pure gold or the Gold GXT performance grade at 30.0 µin (0.76 µm) thickness on the mating interface, and the housing carries a UL94 V-0 flammability rating — so the connector is cleared for use in equipment that must meet that flame class.
Where it fits in the series
The 68024 base number identifies this as the 24-position member of the BERGSTIK II series at 0.100-inch pitch with solder termination. Verify the position count against your BOM before committing.
What this connector is for
Single-row 0.100-inch headers of this type are the workhorse board-to-board and board-to-wire stacking connector in industrial control, instrumentation, and communication equipment — the 24-position count gives reasonable signal aggregation without the routing density pressure of a dual-row part at the same pitch. The push-pull fastening and square pin contact shape make it a through-hole design suited to wave or hand-solder assembly on FR4 or equivalent PCB substrates.
Sourcing and lifecycle
The 68024-124HLF carries an Active product status — quoted to order against BOM quantities with no official successor or cross-reference on record. Confirm the position count against your BOM line and verify the mating receptacle pitch and contact arrangement before committing.