What the 92417-460HLF Is
The Amphenol FCI 92417-460HLF is the 60-circuit member of the BERGSTIK II board-to-board header series — a dual-row, unshrouded male pin header rated 5 A per contact with a 0.100" (2.54 mm) pitch across both rows. Through-hole push-pull termination lands the contacts directly in the PCB; the square pin shape accepts a matching IDC or wire-wrap socket. The 100 µin (2.54 µm) tin plating on both the mating face and the solder post gives this part a 5 A current rating and is suited for general-purpose signal and low-power interconnect in industrial automation, consumer device internals, and instrumentation boards that stack or run parallel on 0.100" grids.
Board Layout Footprint
At 0.100" (2.54 mm) pitch with 60 positions, the through-hole post extends 0.110" (2.79 mm) below the insulator shoulder. The mated engagement length is 0.320" (8.13 mm) on the mating side; the overall contact length is 0.530" (13.46 mm). The insulator body height matches the mating-side pin protrusion at 0.100" (2.54 mm). All 60 positions are loaded.
Compliance Snapshot
The insulator body carries a UL94 V-0 flammability rating. Contact material is phosphor bronze; contact finishes on both the mating face and the solder post are tin. No separate RoHS, REACH, or UL safety listing is on record for the connector itself — compliance documentation for any declarations should be requested from Amphenol FCI before finalising the BOM approval package.