Skip to main content
Log in
SFW12R-1STE9LF — Amphenol product photo
Amphenol

SFW12R-1STE9LF Amphenol ICC FFC Connector 12 Pos 1.00mm

MPNSFW12R-1STE9LF
Active

Amphenol ICC (FCI) SFW-R FFC connector, order code SFW12R-1STE9LF, 12 positions, 1.00 mm pitch, 1 A, 100 V, tin-plated bottom contacts, zero insertion force (ZIF), surface-mount right-angle, solder termination.

$0.5000Ref. price · indicative, final on quote
SFW12R-1STE9LF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

SFW12R-1STE9LF Technical Specifications
ParameterValue
SeriesSFW-R
Mounting typeSurface Mount, Right Angle
Cable end typeStraight, Tapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating100V
Current rating1A
Operating temperature-55°C~105°C
Housing colorBrown
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialPolyphenylene Sulfide (PPS), Glass Filled
Actuator materialPolyphenylene Sulfide (PPS), Glass Filled
Height above board0.106\" (2.70mm)
Material flammability ratingUL94 V-0
Pitch0.039\" (1.00mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesZero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishTin
Locking featureSlide Lock
FFC, FCB thickness0.30mm, 0.33mm
Positions12

Product details

ZIF FFC connector, 12 circuits, 1.00 mm pitch

The SFW12R-1STE9LF is the 12-circuit member of Amphenol ICC's SFW-R FFC/FPC connector line, featuring a zero insertion force (ZIF) slide-lock actuator and bottom-side contacts.

FFC thickness and contact side

The ZIF mechanism accepts FFC thicknesses of 0.30 mm and 0.33 mm — the actuator locks the flex against the bottom contacts, so the cable end must be straight or tapered with the conductor pattern facing down. The 20-cycle mating rating is typical for tin-plated ZIF connectors; the slide lock provides positive retention without relying on the flex cable's own stiffness.

Frequently asked questions

What FFC thickness does SFW12R-1STE9LF accept?

The connector accepts FFC thicknesses of 0.30 mm and 0.33 mm. The cable end type must be straight or tapered.