Skip to main content
SMP-MSLD-PCS17T — Amphenol product photo

SMP-MSLD-PCS17T SMP Jack Male Pin, 50 Ohm, 18 GHz, NRND

MPNSMP-MSLD-PCS17T
NRND

SMP-MSLD-PCS17T SMP jack, male pin, 50 Ohm impedance, 18 GHz max frequency, gold body finish, limited detent, surface mount, 500 mating cycles.

$5.1100Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

SMP-MSLD-PCS17T Technical Specifications
ParameterValue
Mounting typeSurface Mount
Connector typeJack, Male Pin
Fastening typeSnap-On
Frequency - max18 GHz
Operating temperature-65°C ~ 165°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesLimited Detent
Impedance50 Ohms
Body finishGold
Mating cycles500
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

SMP-MSLD-PCS17T — 50 Ohm SMP Jack, 18 GHz Ceiling, Limited Detent

It belongs to the SMP-MSLD series of blind-mate RF interconnects, and the limited-detent feature means the mating retention force is lower than a full-detent version — useful when the connector needs to be disconnected more than a few times in the field without a special tool.

Rated to 18 GHz maximum frequency, this SMP jack covers the full L, S, C, X, and Ku bands — enough headroom for most microwave transceiver, test equipment, and antenna feed applications. The 500-cycle mating life is driven by the gold-on-gold contact interface (centre contact and body both gold-plated), which resists fretting corrosion through repeated connect-disconnect cycles.

NRND — Sourcing Reality for the SMP-MSLD-PCS17T

That means the manufacturer is not actively developing this part for new projects, though existing production and aftermarket support may continue for a time.

SMP Interface — Mating Half and Termination

The shield termination and contact termination are both solder, and the package is Tape & Reel (TR) with a Cut Tape (CT) option, which suits the surface-mount assembly line. The single-port configuration means one RF channel per connector body.

Frequently asked questions

Is the SMP-MSLD-PCS17T obsolete or NRND?

The SMP-MSLD-PCS17T is listed as NRND (Not Recommended for New Designs). It is not fully discontinued, but the manufacturer advises against using it in new designs.

What is the impedance and frequency range of the SMP-MSLD-PCS17T?

The gold-plated brass body and PTFE dielectric maintain that impedance through the mated interface.