Hirose DF12 series, 36-position header, 0.020" (0.50mm) pitch, 2 rows, surface mount, gold contacts, 3.5mm mated stacking height, board guide and solder retention features.
| Parameter | Value |
|---|---|
| Series | DF12 |
| Mounting | Surface Mount |
| Connector type | Header, Outer Shroud Contacts |
| Height above board | 0.110\" (2.80mm) |
| Mated stacking heights | 3.5mm |
| Pitch | 0.020\" (0.50mm) |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Features | Board Guide, Solder Retention |
| Contact finish | Gold |
| Rows | 2 |
| Positions | 36 |
| Contact finish thickness | 8.00µin (0.203µm) |
The Hirose DF12(3.5)-36DP-0.5V(86) is a 36-position board-to-board header from the DF12 series, with a 0.020" (0.50mm) pitch and two rows of gold-plated contacts. The mated stacking height is 3.5mm, which sets the gap between parallel PCBs in a mezzanine stack.
The 0.020" (0.50mm) pitch is the tightest in the DF12 family — the board footprint must match this fine spacing to route the 36 signal traces out from under the connector.
The mated stacking height is 3.5mm, as indicated by the part number suffix. This sets the fixed gap between the two PCBs in a mezzanine stack.
The pitch is 0.020" (0.50mm), it has 36 positions in two rows, gold contact finish at 8.00µin (0.203µm), and a surface-mount termination. The mated stacking height is 3.5mm.
This obsolete part is sourced to order against your RFQ.