JST Sales America Inc., NH series, Board to Cable/Wire, Header Bottom Entry, 2 positions, 1 row, 0.098" (2.50mm) pitch, Solder termination, Through Hole, Tin mating finish, Friction Lock, 3A, 250V, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | NH |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Bottom Entry |
| Fastening type | Friction Lock |
| Voltage rating | 250V |
| Current rating | 3A |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.394\" (10.00mm) |
| Insulation material | Polyamide (PA6), Nylon 6 |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.098\" (2.50mm) |
| Positions | 2 |
| Contact finish - post | Tin |
| Contact length - post | 0.130\" (3.30mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.236\" (6.00mm) |
The bottom-entry design means the pins exit the housing on the same side as the PCB, so the mating connector approaches from the board edge, not from above. Compared to the 4-position BE4P-SHF-1AA(LF)(SN) or 5-position BE5P-SHF-1AA(LF)(SN), this 2-position variant is the smallest in the same NH family, sharing the same pitch, current rating, and lock style.
The BE2P-SHF-1AA mates with the JST NH series crimp receptacle housing (order code typically starts with 'NH' followed by the circuit count). The friction lock on the header engages with the corresponding ramp on the receptacle. Confirm the exact housing part number against your wire gauge and terminal selection.