Skip to main content
Log in
JST BE3P-SHF-1AA(LF)(SN) — Pin Headers, Sockets & Housings

JST BE3P-SHF-1AA(LF)(SN) NH Header, 3-Pin 2.50mm Pitch

MPNBE3P-SHF-1AA(LF)(SN)
Active

JST Sales America Inc., NH series, Board to Cable/Wire, Header, Bottom Entry, Through Hole, Solder, 3 Positions, 1 Row, 0.098" (2.50mm) Pitch, Friction Lock, Tin Contacts, 3A, 250V, UL94 V-0

$0.6600Ref. price · indicative, final on quote
JST BE3P-SHF-1AA(LF)(SN) datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

BE3P-SHF-1AA(LF)(SN) key specifications
ParameterValue
SeriesNH
TypeMale Pin
MountingThrough Hole
Connector typeHeader, Bottom Entry
Fastening typeFriction Lock
Voltage rating250V
Current rating3A
Operating temperature-25°C~85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.394\" (10.00mm)
Insulation materialPolyamide (PA6), Nylon 6

All specifications

BE3P-SHF-1AA(LF)(SN) additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.098\" (2.50mm)
Positions3
Contact finish - postTin
Contact length - post0.130\" (3.30mm)
Contact finish - matingTin
Contact length - mating0.236\" (6.00mm)

Product details

For a field-service tech swapping a cable assembly, that lock is the difference between a connector that stays mated and one that walks loose.

Footprint and Routing Constraints

Bottom-entry orientation means the header body sits flush against the PCB, with pins exiting the opposite side — typical for wire-to-board applications where the cable enters from below the board.

Termination is solder-only — no press-fit or IDC option.

The base product number BE3P-SHF is shared across the NH series — the full suffix (LF)(SN) indicates lead-free solder plating and RoHS compliance. The housing is natural nylon 6 with UL94 V-0 flammability rating.

Frequently asked questions

What is the mating connector for BE3P-SHF-1AA?

It mates with JST NH series receptacle housings (e.g., part numbers starting with B3P-SHF or similar) that accept crimp terminals. The friction lock on this header engages with the corresponding ramp on the female housing.

Is BE3P-SHF-1AA(LF)(SN) RoHS compliant?

Yes — the (LF)(SN) suffix indicates lead-free solder plating, consistent with RoHS compliance.