JST XH series header, order code BH10B-XH-2, 10 positions, single row, 2.50 mm pitch, 3 A (AC/DC), 250 VAC/DC, tin-plated mating contacts, through hole, press-fit solder termination, shrouded - 4 wall, detent lock.
| Parameter | Value |
|---|---|
| Series | XH |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 250VAC/DC |
| Current rating | 3A (AC/DC) |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.559\" (14.20mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6, Glass Filled |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Features | Board Guide |
| Shrouding | Shrouded - 4 Wall |
| Termination | Press-Fit, Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.098\" (2.50mm) |
| Positions | 10 |
| Contact finish - post | Tin |
| Contact length - post | 0.134\" (3.40mm) |
| Contact finish - mating | Tin |
The BH10B-XH-2 is the 10-position member of JST's XH header line, a shrouded board-to-wire header with tin-plated male square pins. Tin-on-tin mating contacts are rated 3 A (AC/DC) per circuit at 250 VAC/DC, with the detent lock providing positive retention against vibration-induced separation.
The BH10B-XH-2 mates with JST XH series crimp receptacle housings (e.g., XHP series) using the appropriate crimp terminals. The detent lock engages with the matching housing latch.
RoHS and REACH compliance documentation is available from JST upon request.