2-Position Receptacle Housing, 4.00 mm Pitch — BH Series
The crimp termination style means you terminate the wire first, then insert the contact into the housing cavity; the retention latch holds it in place. For a complete mated pair, you'll need the matching male header (BH series pin header) and the correct crimp terminals for your wire gauge.
Position Count Comparison: 2 vs 3 vs 5
Within the same BH series at the same 4.00 mm pitch, the 2-position BHR-02VS-1 sits alongside the 3-position BHR-03VS-1 and the 5-position BHR-05VS-1. Select the position count that matches your circuit requirement; the pitch and keying are consistent across the family.