The BM06B-ZESS-TBT(LF)(SN): Six positions on a 1.50 mm pitch — the footprint fits a tight board edge where 0.100-inch headers are too wide. Surface-mount termination with a pick-and-place pad and solder retention features means this header runs through a standard reflow oven without secondary handling. The shrouded four-wall design protects the contacts during mating and prevents bent pins in a blind-mate scenario.
Mates with the ZE series female crimp housings (e.g., ZE-xx) using the appropriate tin-plated crimp terminals. The outer shroud contact design means the header body, not the pins, guides the alignment.
The BM06B-ZESS-TBT(LF)(SN) sits at 6 positions. For 7 positions, the BM07B-ZESS-TBT is the next step up. All three use the same locking ramp and shrouded body profile, so the board layout for the 6-position version is a direct drop-in for the 5- or 7-position sibling if the circuit count changes.