JST GH series, 7-position, 1.25 mm pitch SMD header, shrouded 4-wall, locking ramp, tin-plated contacts, rated 1 A at 50 V, mated stack height 7.3 mm.
| Parameter | Value |
|---|---|
| Series | GH |
| Type | Outer Shroud Contact |
| Mounting | Surface Mount |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 50V |
| Current rating | 1A |
| Operating temperature | -25°C~85°C |
| Contact material | Phosphor Bronze |
| Insulation color | Natural |
| Insulation height | 0.159\" (4.05mm) |
| Insulation material | Polyamide (PA9T), Nylon 9T |
| Parameter | Value |
|---|---|
| Mated stacking heights | 7.3mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Pick and Place, Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Rectangular |
| Rows | 1 |
| Pitch | 0.049\" (1.25mm) |
| Positions | 7 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The shrouded 4-wall design and locking ramp provide positive retention against vibration, typical for wire-to-board interconnects in compact consumer and industrial electronics.
Mates with JST GH series crimp receptacles (e.g., part numbers starting with BM07B-GH). Termination is solder to SMD pads.
It mates with JST GH series crimp receptacles, such as the BM07B-GH series housings with matching crimp terminals. The locking ramp on this header engages the receptacle latch.