Skip to main content
Log in
BM14B-SRSS-TBT — JST product photo
JST

BM14B-SRSS-TBT JST SH/SR 14-Pin 1mm Pitch SMT Header

MPNBM14B-SRSS-TBT
Active

JST SH/SR series, Board to Cable/Wire, Header, Male Pin, 14 circuits, 1.00 mm pitch, Surface Mount, Solder termination, Tin contacts, 1 A, 50 V, shrouded - 4 wall, natural PA housing, UL94 V-0.

$1.9300Ref. price · indicative, final on quote
BM14B-SRSS-TBT datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

BM14B-SRSS-TBT Technical Specifications
ParameterValue
SeriesSH/SR
GenderMale Pin
Mounting typeSurface Mount
Connector typeHeader
Fastening typePush-Pull
Voltage rating50V
Current rating1A
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.167\" (4.25mm)
Insulation materialPolyamide (PA), Nylon
Mated stacking heights4.9mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesPick and Place, Solder Retention
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.039\" (1.00mm)
Positions14
Contact finish - postTin
Contact finish - matingTin

Product details

14-Pin 1mm Pitch SMT Header for Wire-to-Board

The BM14B-SRSS-TBT is a 14-position, single-row header from JST's SH/SR series, designed for board-to-cable/wire connections. The header is fully shrouded on all four walls, providing mechanical protection and polarization to prevent mis-mating with the receptacle. The push-pull fastening type means it mates without a locking latch — suitable for low-vibration environments where the connector is not subject to constant shock. The mated stack height is 4.9 mm, which defines the z-height budget between the board and the wire harness.

Mating and Termination Fit

Mates with the JST SH/SR series receptacle housing (order code series: SR). Termination is solder-only (SMT).

Frequently asked questions

What is the mating connector for BM14B-SRSS-TBT?

The mating connector is a JST SH/SR series receptacle housing (SR series) with 14 positions and 1.00 mm pitch. The specific order code depends on the wire gauge and locking feature required.

Is BM14B-SRSS-TBT RoHS compliant?

Yes, BM14B-SRSS-TBT is listed as RoHS compliant.

Does BM14B-SRSS-TBT have a direct replacement or equivalent?

The SH/SR series has multiple position counts, but a pin-compatible alternative would require the same pitch, circuit count, and shrouding.