Skip to main content
Log in
BM15B-ZESS-TBT — JST product photo
JST

BM15B-ZESS-TBT JST ZE Series Header, 15 Pos, 1.5mm Pitch

MPNBM15B-ZESS-TBT
Active

JST ZE series, BM15B-ZESS-TBT, SMD header, 15 positions, single row, 1.50 mm pitch, shrouded 4-wall, locking ramp, tin-plated contacts, 2 A, 100 V, UL94 V-0, natural insulation.

$1.5800Ref. price · indicative, final on quote
BM15B-ZESS-TBT datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

BM15B-ZESS-TBT Technical Specifications
ParameterValue
SeriesZE
GenderOuter Shroud Contact
Mounting typeSurface Mount
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating100V
Current rating2A
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.295\" (7.50mm)
Insulation materialPolyamide (PA), Nylon
Mated stacking heights9.4mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesPick and Place, Solder Retention
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeRectangular
Rows1
Pitch0.059\" (1.50mm)
Positions15
Contact finish - postTin
Contact finish - matingTin

Product details

Sizing the footprint for a 15-circuit wire-to-board

At 1.50 mm pitch, the BM15B-ZESS-TBT packs 15 circuits into a single row — the board footprint runs about 22.5 mm wide from the centre of pin 1 to the centre of pin 15, plus the shrouded walls on each end. That narrow, long profile suits board-edge routing where you need to bring a ribbon of wires off the PCB without eating up z-height.

This header mates with JST ZE series crimp receptacles — the matching housing accepts the ZE crimp terminals (20–26 AWG, tin or gold depending on your cycle count).

The housing material is UL94 V-0 rated polyamide — it self-extinguishes within 10 seconds, which satisfies the flammability requirement for most end-product safety certifications.

Frequently asked questions

Is BM15B-ZESS-TBT RoHS compliant?

No — the BM15B-ZESS-TBT is RoHS non-compliant. The lead-free variant is BM15B-ZESS-TBT(LF)(SN), which swaps the tin plating for a RoHS-compliant finish.

Does BM15B-ZESS-TBT have pick-and-place features?

Yes — the header includes a pick-and-place pad on top of the shroud and solder retention features to hold it in place during reflow.