JST ZPD series, Board to Cable/Wire, Header, Surface Mount, 30 positions, 1.50mm pitch, 2A per contact, 100V, locking ramp, UL94 V-0, 9.5mm mated stack height, RoHS non-compliant.
| Parameter | Value |
|---|---|
| Series | ZPD |
| Type | Outer Shroud Contact |
| Mounting | Surface Mount |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 100V |
| Current rating | 2A |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.219\" (5.56mm) |
| Insulation material | Polyamide (PA), Nylon |
| Parameter | Value |
|---|---|
| Mated stacking heights | 9.5mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Features | Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Rectangular |
| Rows | 2 |
| Pitch | 0.059\" (1.50mm) |
| Positions | 30 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The BM30B-ZPDSS-TF is a 30-position, dual-row, surface-mount header from JST's ZPD series, pitched at 1.50mm between contacts. The 30-position count is the highest in the ZPD series, which sets the footprint width and determines the mating cable assembly.
The part is listed as RoHS non-compliant, which will block BOM placement in any RoHS-required assembly unless an exemption applies.
No, the BM30B-ZPDSS-TF is listed as RoHS non-compliant. Check with your compliance team to see if an exemption applies to your assembly.
The BM30B-ZPDSS-TF mates with the ZPD series crimp receptacle (wire-to-board side). The receptacle uses the same 1.50mm pitch and locking ramp interface. Confirm the exact receptacle housing and terminal part numbers from the ZPD series documentation.